Datamax O'Neil Mark III E-4305A Návod k obsluze stáhnout pdf (Strana 52)

46 Appendix B – Ethernet Setup

’

1. Open your web browser. Type in the IP Address of the printer. The Default IP is: 192.168.10.26.



Note: If you (or DHCP) have assigned a different IP address to the printer, make sure to

use this address.

2. The following page will appear:

The printer’s fourteen internal web pages are accessible via the navigation bar on the left-hand side.

The Generic Network Configuration and Wired Ethernet Configuration pages contain many items

associated with the setup of the network card. The following tables provide information on each of the items

listed on these pages.



 You must provide a password to change any settings; the default password is sysadm

 After changes are sent to the printer (on all web pages), the printer must be reset in order for the

changes to take effect. This can be done from the Reset Network Parameters web page.



If any address parameters were changed such as IP address, subnet or gateway, the printer might

not be viewable from the current host if they are no longer on the same subnet.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58

Žádné komentáře

Datamax O'Neil Mark III E-4305A Návod k obsluze Strana 52