Datamax-oneil I-Class Mark II Operator’s Manual Uživatelský manuál stáhnout pdf (Strana 79)

Appendix A – Specifications 73

Approved Media

To achieve optimum print quality and maximum printhead life, Datamax-O’Neil specifies the use of

Datamax-O’Neil brand media and ribbons. These supplies are specially formulated for use in our

printers; use of non-Datamax-O’Neil supplies may affect the print quality, performance, and life of

the printer or its components.

For a current list of approved media and ribbons for use in direct thermal and thermal transfer

applications, please contact a Media Representative at (407) 523-5650.

Side View

Top View

Media Dimensional Requirements

Designator Description Minimum

[1]

Maximum

[1]

A Label width 1.00 4.65

B Liner width 1.00 4.65

C Gap (or notch) between labels

[3]

.10 –

D Label length

[3]

.25 –

E Media thickness .0025 .010

F Notch opening width .20 .500

G Media edge to sensor aperture distance .20 2.25

H Reflective (black) mark width

[2]

.50 4.65

I Distance between reflective marks

[3]

.50 –

J Reflective mark length

[3]

.10 –

K Label repeat distance

[3]

.35 –

[1]

Units of measure are given in inches and referenced by the direction of label feed.

[2]

The reflective (black) mark must be carbon based, placed on the backside of the stock, and the

reflectance shall be less than 10% at wavelengths of 950 and 640 nm.

[3]

The maximum allowable length of the combined label and gap (or mark) measurement cannot

exceed 99.99 inches.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 93 94

Komentáře k této Příručce

Žádné komentáře

Datamax-oneil I-Class Mark II Operator’s Manual Uživatelský manuál Strana 79

Komentáře k této Příručce

Související produkty a manuály pro Tiskárny Datamax-oneil I-Class Mark II Operator’s Manual