Datamax O'Neil H-4310X Návod k obsluze stáhnout pdf (Strana 38)

28 H-Class

D. Route the ribbon up and around the Ribbon Take-Up Hub. Wrap the ribbon several

times clockwise (as indicated by the directional arrows) around the hub to secure it.

E. Lower the Printhead Assembly then rotate the Printhead Latch completely clockwise.

F. Close the cover. With READY displayed, press and hold the FEED Key until at least

one gap (or mark) advances; see Section 3.4.



Remove used ribbon when the Ribbon Roll is depleted: Pull the empty core from the

Ribbon Supply Hub. Grasp the used roll on Ribbon Take-Up Hub then pull and

squeeze to remove the spent ribbon. (To remove partially depleted rolls, cut the

ribbon then remove the roll as described above and discard any used ribbon.)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 179 180

Žádné komentáře

Datamax O'Neil H-4310X Návod k obsluze Strana 38