Datamax O'Neil H-8308P Návod k obsluze stáhnout pdf (Strana 47)

• Cut By Job

• Cut By Count

Cut By Count enables the user to specify the number of labels printed prior to being cut.

Select the Cut

By Count field and enter the number of labels to be printed.

Rewinder Mode

Rewinder Mode controls the operation of the powered internal label rewinder.

For printers with a print media rewinder installed, select from the following Rewinder Mode options:

• Off

• Clockwise

• Counterclockwise

Present Sensor

The Present Sensor option controls the on-demand dispensing of labels.

To enable or disable the installed Present Sensor option, select or deselect the corresponding checkbox.

GPIO Mode

The GPIO Mode enables or disables the applicator function from the printer. For printers with an

applicator connected, select from the following settings:

• Off

• Custom

e. Pause Mode

The Pause Mode option allows the user to prompt for the next label.

To enable or disable the Pause Mode, select or deselect the corresponding checkbox.

Media

Selecting the media button allows the user to change the print media and ribbon settings. The printer

may automatically set up certain parameters once the paper and ribbon types have been input either

using the Media ID or manual entry.

Media ID

The user can qualify various media and ribbon types and assign an ID value to them.

After pressing the

Media ID button, ID values can be selected that will configure the printer to the optimum print

settings.

Using the up and down arrows, select the appropriate Paper ID.

If applicable, tab to the Ribbon ID page and use the up and down arrows to

highlight

the appropriate value.

Select the Home button and select either the green Accept button or the Red reject button.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 115 116

Žádné komentáře

Datamax O'Neil H-8308P Návod k obsluze Strana 47