Datamax O'Neil H-8308P Návod k obsluze stáhnout pdf (Strana 66)

Remove Security

To remove security, select the lock icon to the right of the Change Password utility. Type your

password and then select the green Accept button. To confirm, select the green Accept button.

Maintenace

To adjust the following Maintenance settings, select the Maintenance button. The maintenance settings

include:

• Cleaning

• Upgrade

• Odometers

Cleaning

Cleaning should be routinely performed. The maintenance alarm is set by the user in thousandths of

inches.

Enter the desired maintenance reminder interval. Once a fault appears directing the user to clean the

printhead, insert a factory-approved cleaning card under the printhead and select Clean Now.

The Elapsed field displays the number of inches, in thousandths, since the last cleaning.

If the printhead is cleaned manually, the Reset Counter button can be used to reset the maintenance

timer and start tracking again.

Maintenance Settings

Ranges

Actions

Default

Maintenance

0k to 1000k in.

0 (never)

Clean Now

Select Clean Now

Reset Counter

Reset Clean Counter

Upgrade

The Upgrade function allows the user to upgrade the printer software. Insert a mass-storage device

into the USB host with the appropriate file to be uploaded and then select Upgrade.

Do not turn off the printer during the process. Once the printer has been updated, it will reboot.

When the printer is back online, be sure to power-cycle the printer once more by turning it off and

then back on.

Note: Save all user files, labels and setups to a mass-storage device connected to the USB host

prior to updating your printer. Files that are not saved may be lost during the upgrade process.

Note: Upgrades may also be performed using the Configuration Utility.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Žádné komentáře

Datamax O'Neil H-8308P Návod k obsluze Strana 66