Datamax-oneil S-Class User Guide Uživatelský manuál stáhnout pdf (Strana 51)

S-Class 43

4.4.2 Platen Roller Cleaning

Print quality can decline if the platen roller becomes contaminated with

paper dust, grit or adhesive. When this build-up is not removed, it can

cause abrasive damage to the printhead. Clean the Platen Roller as

follows:

 Turn ‘Off’ and unplug the printer. (ST Models: Raise the access

cover; see Section 3.2.)

 Slide the printhead latch to the ‘unlocked’ position and then raise (or,

in the case of SV Models, lower) the printhead assembly; see Section

4.4.1. Remove any ticket stock.

 Using a cotton swab or lint-free cloth dampened

with isopropyl

alcohol, remove all debris on the Platen Roller. Manually rotate the

roller and repeat until the entire surface has been cleaned.

CAUTION

NEVER use a sharp object to clean the Platen Roller. Damage

can result.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 91 92

Žádné komentáře

Datamax-oneil S-Class User Guide Uživatelský manuál Strana 51