Datamax-oneil DPL Programmer’s Manual Uživatelský manuál stáhnout pdf (Strana 20)

Immediate Command Functions

SOH C Stop/Cancel

This command performs the same function as pressing the STOP/CANCEL Key (i.e., it

clears the current format from the print buffer, pauses the printer, and illuminates the

Paused/Stop Indicator). (The pause condition is terminated as described under <SOH>B.)

Syntax:

SOH>C

Sample:

<SOH>C

Printer Response: The print buffer is cleared and the Paused/Stop Indicator is

illuminated (and/or PAUSED is displayed on the LCD or graphics

display) as operations are suspended, until one of the following

occurs:

• The <SOH>B command is sent to the printer; or

• The PAUSE Key is pressed.

Upon which the printer will turn the Paused/Stop Indicator

“Off” and/or remove PAUSED from the LCD or graphics

display. (If the Receive Buffer is not full, an <XON> character

will be transmitted from the printer.)

SOH D SOH Shutdown

This command is ignored by the printer.

SOH E Send Batch Remaining Quantity

This command causes the printer to return a four-digit number indicating the quantity of

labels that remain to be printed in the current batch, followed by a carriage return.

Communications latency may cause this value to be higher than actual on some printers.

Syntax:

SOH>E

Printer response:

nnnn<CR>

Where:

nnnn -

Are four decimal digits, 0-9999.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 295 296

Žádné komentáře

Datamax-oneil DPL Programmer’s Manual Uživatelský manuál Strana 20